制藥用衛生級不銹鋼米勒鈦人孔生產廠家

圓形鈦TA2法蘭人孔

衛生級人孔多是使用在食品  制藥，釀酒 ，化工行業

材質有不銹鋼304   316L     904L  Q235B   TA2

鈦TA2法蘭人孔快開不銹鋼手孔壓力范圍可以定制

圓形鈦TA2法蘭人孔

可以根據客戶需求定做，滿足化工，環保等要求。

鈦及鈦合金具有許多優良特性，主要體現在如下幾個方面：

1.強度高。鈦合金具有很高的強度，其抗拉強度為686—1176MPa，而密度僅為鋼的60%左右，所以比強度很高。

2.硬度較高。鈦合金(退火態)的硬度HRC為32—38。

3.彈性模量低。鈦合金(退火態)的彈性模量為1.078×10－1.176×10MPa，約為鋼和不銹鋼的一半。

4.高溫和低溫性能優良。在高溫下，鈦合金仍能保持良好的機械性能，其耐熱性遠高于鋁合金，且工作溫度范圍較寬，目前新型耐熱鈦合金的工作溫度可達550—600℃；在低溫下，鈦合金的強度反而比在常溫時增加，且具有良好的韌性，低溫鈦合金在－253℃時還能保持良好的韌性。

5.鈦的抗腐蝕性強。鈦在550℃以下的空氣中，表面會迅速形成薄而致密的氧化鈦膜，故在大氣、海水、硝酸和硫酸等氧化性介質及強堿中，其耐蝕性優于大多數不銹鋼

。

Round Titanium TA2 Flange Manhole

Sanitary manholes are used in food, pharmaceutical, winemaking, and chemical industries.

The material is stainless steel 304 316L 904L Q235B TA2

Titanium TA2 flange manhole quick opening stainless steel hand hole pressure range can be customized

Round Titanium TA2 Flange Manhole

It can be customized according to customer needs to meet the requirements of chemical industry and environmental protection.

Titanium and titanium alloys have many excellent properties, mainly reflected in the following aspects:

1. High strength. Titanium alloy has high strength, its tensile strength is 686-1176MPa, and its density is only about 60% of steel, so its specific strength is very high.

2. High hardness. The hardness HRC of titanium alloy (annealed) is 32-38.

3. Low elastic modulus. The elastic modulus of titanium alloy (annealed state) is 1.078×10-1.176×10MPa, which is about half of steel and stainless steel.

4. Excellent high temperature and low temperature performance. At high temperature, titanium alloy can still maintain good mechanical properties, its heat resistance is much higher than that of aluminum alloy, and its working temperature range is wide. At present, the working temperature of new heat-resistant titanium alloy can reach 550-600 °C; , the strength of the titanium alloy is higher than that at room temperature, and it has good toughness. The low-temperature titanium alloy can maintain good toughness at -253 ℃.

5. Titanium has strong corrosion resistance. Titanium in the air below 550 ℃, the surface will quickly form a thin and dense titanium oxide film, so in the atmosphere, seawater, nitric acid and sulfuric acid and other oxidizing media and strong alkali, its corrosion resistance is better than most stainless steel.

產品圖片：制藥用衛生級不銹鋼米勒鈦人孔生產廠家

公司簡介：

安徽利勒潔凈設備科技有限公司是國內專業生產制造潔凈衛生級閥門管件，主要應用于食品機械行業、制藥機械行業、乳制品行業、釀酒飲料行業以及精細化工等行業高精度衛生級流體設備的專業生產廠家，產品規格齊全；產品主要有：制藥用衛生級不銹鋼米勒鈦人孔生產廠家，無菌隔膜閥，卡箍直通隔膜閥，三通隔膜閥，法蘭隔膜閥，氣動隔膜閥，U型隔膜閥，罐底隔膜閥 ；無菌球閥，卡箍直通球閥，螺紋球閥，焊接球閥，氣動球閥，法蘭球閥，電動球閥；衛生級蝶閥，焊接蝶閥，卡箍直通蝶閥，螺紋蝶閥，法蘭蝶閥，氣動蝶閥，電動蝶閥；不銹鋼衛生泵，不銹鋼衛生級離心泵，不銹鋼衛生自吸泵，不銹鋼酒精防爆泵，衛生奶泵，衛生飲料泵；止回閥，過濾器、呼吸器、換向閥、防混閥、安全閥；衛生級不銹鋼管件，焊接彎頭，快裝彎頭，不銹鋼三通，快裝三通，四通，真空彎頭，大小頭；罐頂組件系列，不銹鋼儲罐，發酵罐，不銹鋼衛生級人孔，清洗球/器，視鏡燈，排氣閥等其它非標產品生產加工；我們竭誠為您服務.